Even more modern and lighter than its previous version, the new TFV 1600 is a vertical milling drill designed to perform drilling up to diameters of 85 mm and milling shapes on glass of thickness from 3 to 19 mm. The machine is made up of 3 independent sections: an input conveyor, a central body with a cabin where the processing takes place and an output conveyor.
The choice of materials and components is aimed at maximizing corrosion resistance and minimizing the entry of dirt into critical areas of the machine. vertical glass grinding machine
By using a single head and by mounting a specific tool, it is possible to perform "milling" to create shapes (e.g. notches for assembling locks and hinges). With the application of the automatic tool change device (Optional), it is possible to combine drilling and milling in a single cycle, creating a finished door in a single pass.
Drilling and milling are carried out with ultra-precise electro spindles, ISO 30 tool holders, pressurized so that external agents such as air, dust, etc. do not enter the spindle and do not compromise its operation.
The spindle, which allows a rotation speed of 12,000 RPM, is air-cooled when in operation.
The glass is conveyed in and out via conveyors equipped with belts that slide on supports that allow the loading of large sheets with transport speeds of up to 12 m/min. The movement of the glass inside the central body takes place using toothed belts, equipped with an external covering that allows maximum friction in order to keep the glass firmly in place while the internal lining in contact with the guide is made of a special low-friction material allows better sliding of the belts on the guide, avoiding tears and making position control precise.
The guides are also made of special material, helping to maximize the performance of the belts.
The updated version of the TFV 1600 chooses a new tool change position, which brings the following advantages:
The new version is immediately characterized by its economic convenience, whilst enhancing the performance already provided by the previous version and increasing advantages such as reliability and precision in the processing.
Log in or register to post comments
Via A. Locatelli 123, 24019 Zogno Bg Italy
V. Alla Porada, 188 20831 Seregno Mb Italy
Lübbecker Straße 240 | D 32429 Minden Germany
Peter Lisec Straße 1, 3353 Seitenstetten Austria
2875 Jupiter Park Drive, Suite 100 Jupiter , FL 33458 United States
Away for Monastier, 4 31056 Vallio di Roncade TV Italy
digital display glass edging machine Via abundance 11/13 22070 carbonate co Italy